Disabling Hazards

Owned by Kyle Gray (Unlicensed)
Mar 28, 2017
1 min read

Step-by-step guide

  1. Select Safety > Hazard Register > Hazards. The Hazard Register screen is displayed.

  2. Right-click on the required hazard in the Hazard Browser pane.



  3. Select ‘Set In-Active’. The hazard profile is hidden in the Hazard Browser pane.

 

  • To reactivate a hazard profile you must have access to the Hazard Register Setup area. Select Safety > Setup > Hazard Register and scroll to the Audit/Hazard Areas pane. Right-click on the inactive hazard profile and select ‘Set Active’.

 

Hazards Risks Module Guide: